Welcome the Rush Race 5.8GHz Video Transmitter! Designed to give you the best video signal possible, perfect for drone racing or FPV freestyle as well as fixed wing airplanes. Low profile size makes the Rush Race VTX a great choice for tight builds, optional solder pads are also included in case you do not want to use the connector. Get yours today!
Lock-on: The new designed locked frequency circuit coordinates software optimization, enables transmitting frequency of TANK to
keep the set point in any harsh (high interference) environment.Allows 8 drones racing in same band, without interference.
Power Lut: Built- in high precision power lookup table which performs milliwatt power calibration for all channel, full band has it’s own
unique power output. In multi pilot flight, all pilots will benefit from this and obtain a fair and consistent signal
Silent setting: The intelligent transmit circuit of RACE will not generate any interference signal during the switching and setting of VTX.
With PITMODE, you can set the VTX anytime and anywhere.
Smartaudio: Built- in SmartAudio protocol authorized by TBS. Which can be set with RGB LED by conventional double buttons, and also
access the SmartAudio protocol to set up and view the VTX information via the OSD menu
Pit mode: After entering the PITMODE, the VTX power will be reduced to a minimum. Your video feed is only visible to yourself at close
range, so don’t worry about disturbing others.
- Item name: Rush Race VTX
- Input Voltage: 7-25V DC (2-8s LiPo)
- Output Voltage: 5V 1A
- Channels: 37CH
- Power: PIT/25/200/500mW
- Hole Size: M3
- Dimensions: 28*21.5*4mm
- Weight: 5.7g
- Connector: MMCX
- Serial Protocol: TBS SmartAudio V1
- 1X Rush Race VTX
- 1X Cable Kit
This equipment is being sold under the FCC’s amateur radio rules. Operators must abide by all applicable laws and hold an amateur license to operate this equipment. Use of amateur equipment without a license or use of equipment on restricted frequencies could subject the operator to significant fines by the FCC. By purchasing this equipment, the user is agreeing that they understand these responsibilities and will operate the equipment legally. For information regarding obtaining an amateur radio license, please go to http://www.arrl.org/getting-licensed.
47 CFR 97.215(c) sets a 1 watt limit for amateur devices being used for telecommand. Devices over 1 watt output should not be used for telecommand of model aircraft.
The use and operation of this product in your country may require an amateur radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the purchase and use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. Xhover, LLC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.